Ripping The Little Holes Off The Sides Of The Computer Paper
| Field | What field the skill applies to |
| Went Obsolete | 1992 |
| Made Obsolete By | Internal Paper Cartridges |
| Knowledge Assumed | Manual Dexterity |
| When useful | 1960s, 1970s, 1980s |
Removing the sprocket holes from computer paper did, actually, involve some finesse. In order to remove many pages worth of holes at one time, a user needed to have a feel for the brand and condition of the paper he/she used. Some batches would allow 10 or more sheets to be de-holed at once with ease, while others would require a great deal of back and forth manipulation to produce sufficient fatigue in the perforations.
Simply take the perforated holes on the side and "Fold" them against the paper so that they overlap with the paper. Then using two fingers, start to rip the top part until they seperate. Then just "Slide" your hand down the page.
This is known as "bursting" the "chaff" from tractor feed paper. High capacity line printers often include an automatic burster, and dedicated bursting machines are also commercially available.